Sometimes my projects can get a little beyond my skill and ability. I pride myself on my lateral thinking and problem solving capacity. But like everyone, I sometimes can get locked into an intellectual box that I just can’t find my way out of. In times like this, it is best to just stop what you are doing and pack it up. Coming back to a problem with a fresh attitude and set of eyes can often help. Forcing things in situations like this, can often just see you doing further damage and while increasing your stress.
One of these ‘boxed up’ projects has been slumbering in my cupboard since last year. That is, until just recently when I awoke to an email from the 3D printer, Shapeways, telling me that someone had ordered one of my carriage levers.
It was Mike over at Clickthing, who had just purchased a beautiful Remington Noiseless – as seen here.
The trouble was that while I had designed this part with considerable effort, and even installed it into my own machine, I had yet to actually get the typewriter working. A couple of big issues had stood in my way last year, and I more or less had relegated the machine to the back of the cupboard.
Mike has also had to confront some of the these same problems as well. Not only did he have a broken lever, but he also discovered that the drawband for the mainspring was also shot – and very difficult to replace.
With Michael Clemens rapidly making progress on his machine, I thought I had better get off my arse and perhaps finish my own. So I busted it out of the cupboard, slapped it on my desk, and tried to ignore the collective half dozen or so hours I had burned trying to get it going in the past.
And, within an hour or so I had the machine mostly working. Much to my surprise.
Let’s talk about the lever.
For those who haven’t seen my previous blog about producing this part, here it is.
I wish I had my own 3D printer – even just one that does plastic, so I could have done a couple of cheap prototypes before I printed the main product. Instead, while the lever was quite cheap to print, posting to Australia turned out to be hideously expensive, so I just did the best I could with the design and produced the main.
As such there were a few things about the design that I only learned were wrong when I had it bolted into the machine. There’s no fatal errors in my design that makes it unusable, but the design could still do with a revision.
Firstly, as mentioned before the part needs to be drilled out to be usable. No big deal, and it gives the hole a better fit anyway. But it is something that I can fix with a re-design.
Secondly, the angle of the lever is a fraction out. Coupled with a curve that the original didn’t have, it means that the lever can knock on the side of the paper when you use it. It wouldn’t have been a problem if this machine wasn’t designed in a way – that it had the paper sticking up and out of the typewriter at an absurd angle. This was easily rectified by just shifting the paper locator across to the right a bit. No big deal, but I could have done better. Then again, so could have Remington. In the next version of this machine they put in a proper paper table that didn’t have the paper jutting out into the air stupidly, and in the way of the lever.
My understanding is that even with the original lever, this posed something of a problem.
Third: I needed to put a chamfer onto the edge of the tiny square knob that slots into the machine. This can be easily filed into it, as it only needs to be small. But without it, when you unfold the lever for use, it occasionally catches on a small metal piece that it should just slide over. All you need to do is push the lever a little bit towards the back of the machine (don’t worry, it is made to do this) and just move it past the obstruction.
No big deal, but Michael may need to be mindful about this when his turns up. Eventually I’ll revise the design.
Let’s talk about mainsprings.
Like Michael, I had a broken drawband.
Michael, for the record, you cannot…. I repeat, cannot… Simply tie a new string to a piece of the old one. Why? Because the lumpy knob brushes and catches on parts in the typewriter. Cut your loses, and cut that string and get rid of as much of it as you can.
And while you’re cutting – on the side of the drum with that biggest lip, cut yourself an angled grove like the one in the photo above. This is similar to how the drum on the portable Royal typewriter of this era is set up, and it works perfectly.
Just knot your line, and slip the string into the grove. Have the knot facing outwards of the drum on the flat side, and wrap your string onto it. Be careful when winding the spring though, as you might catch your finger on this grove if you accidentally let the drum slip while winding. I made sure that I had enough string on the line to wrap around the drum at least once, with the carriage fully extended along its tracks.
Now. Let’s talk about Rollers.
One of the biggest problems that stopped me in my tracks last time, were the crystallized rollers. These were fossilized to the point that the hardened rubber inside of the cracks sparkled in the light. They had flats-pots, cavernous cracks and hardness that was almost diamond like. Suffice to say, they were pretty freakin’ useless. The platen was also as slippery as a cockney con-man.
The platen was easy to resolve as it hadn’t cracked, and it at least still sort of felt like rubber. I just rubbed horizontally across it once with a piece of course sandpaper, which gave it plenty of traction.
However the rollers were quite different…. but…. have a look at this!
That’s one sexy recovered roller.
I’ve been experimenting with producing my own rubber parts of late, and it nicely payed off with this typewriter. I’ll blog on this in the near future.
I also hope that Michael finds something here that can help him. Best of luck Michael!
16 thoughts on “Hey now, hey now, my noiseless is back.”
Cheers to you and your Noiseless, hope you get it to 100%!
Impressive. Repairing typewriters takes ingenuity, and you've got it!
Bookmarking, starring, and committing this post to memory.
My replacement lever should be shipping in the next day or so — it's not making a trans-oceanic journey, so the cost is more manageable: only a bit more than I paid for the whole machine.
Notch in the drum? Brilliant. I'll don the goggles and fire up the Dremel. Better than my homemade hook idea, which was going to be chancy at best with the narrow clearances.
Nice work Scott! There's always that dilemma: to bungle on down a possibly blind alley, or to put it back in the box and wait for an epiphany. On the one hand, what's to lose by badgering a problem? You can (nearly) always find another machine for parts – or vice versa – if you screw the thing up beyond redemption. Then again, just like getting a crossword clue, returning to a problem put on the back burner with fresh eyes and a dose of serendipity is a lot more satisfying. Looking forward to your rubber revelations!
Congratulations on the great repairs! I too am working on a Noiseless with a broken draw band. I drilled a hole in the side perpendicular to the original hole and threaded fishing line through it. I've been meaning to post on it, but that was weeks ago. Maybe in a few months I'll get to it.
Quite a nice job on the rollers. That is my next project.
Me too. I have wanted to use this guy for ages, and it is starting to shape up as being a great little machine.
All it really needed with the dremel, was to going in just enough to hook it. I cut in far enough that I had only 'just' opened up a small hole in the drum.
Oh? That's an interesting approach. I'd love to see how it worked.
I'll tell all about the rubber soon.and you are right, sometimes just ploughing through will get you there. I try to avoid trashing a machine into a parts machine, but sometimes.. You just have to.
Wait a second — is the screw that's holding the lever in place on the *front* of your machine? If so, no wonder you had such a time removing it! On the Underwood, it comes in from the back of the machine. The carriage-release lever is slightly in the way, but it's not too bad. I may even have an offset screwdriver that I can fit into there.
Now the big question: how does the lever fold on this machine? I don't think I've ever seen one intact with the lever stowed.
I can't wait for the roller fix reveal! I have a Noiseless 7 with the same issue. This must be the Achilles heel for this machine, but they probably weren't designed with 80 years of service in mind.
Arg! You'll have a much easier time fixing it than I did then!
As for the lever, it simply rocks back down beside the machine, and presses against the side next to the platen knob. Not very ingenious, but that's just how they worked. IF you are finding your one catching, push the lever backwards (against the spring) and roll it past the metal piece that catches it.
I hear you. Almost everyone I know has one that has warped rollers. I think it is the shoddy gum-rubber they used.
Wait. Sandpaper makes rollers alive again? Fantastic!
Sandpaper is good for the Platens, as John has shown me a great little method of using Sandpaper and metho to bring back platens. But, with rollers it is a different story.